Created with Sketch. Created with Sketch.

Components

  • Capacitor 942C20P15K-F 0.15uF 2000V

    Capacitor, 0.15uF, 2kV 942C

    Capacitor, Cornell-Dubilier 942C20P15K-F 0.15uF, 2000V These poly capacitors are the best you can use for Tesla coils period!  They can be used for both solid state (DRSSTC) and spark gap Tesla coils.  These capacitors can take an enormous...

    $7.99
    Add to Cart
  • IGBT snubber capacitor 2uF, 1kV

    Capacitor, IGBT Snubber - 2uF, 1kV

    Capacitor, Snubber 2uF, 1kV - for IGBTs These are designed to be used for most high power IGBT modules including CM300s and CM600s.  They bolt directly to the IGBT terminals. Click here for the datasheet (PDF) Note:  These are used surplus but...

    $7.99
    Add to Cart
  • Circuit Breaker, Single Pole

    Circuit Breaker, Single Pole

    These are very nice DIN rail  mounted circuit breakers for use in your projects, especially DRSSTC Tesla Coils. Click here for the datasheet (PDF) B-Curves are for resistive loads.  Use these for your PLCs, general equipment D-Curves are for...

    $14.99
    Choose Options
  • Circuit Breaker, 2-Pole

    Circuit Breaker, Two Pole

    These are very nice DIN rail  mounted circuit breakers for use in your projects, especially DRSSTC Tesla Coils. Click here for the datasheet (PDF) B-Curves are for resistive loads.  Use these for your PLCs, general equipment D-Curves are for...

    $29.99
    Choose Options
  • CM300DY-12NF Half-Bridge Assembly for DRSSTC Tesla Coils CM300DY-12NF Half-Bridge Assembly for DRSSTC Tesla Coils

    CM300DY-12NF Half-Bridge Assembly

    A complete CM300DY-12NF half-bridge assembly designed for mid-power DRSSTC Tesla coils.  When powered with 115VAC 50/60Hz, the DC bus voltage across the half-bridge is 340VDC and can when driving a properly designed Tesla coil, can produce over 6...

    $659.99 - $759.99
    Choose Options
  • Current Monitor Board 1.0

    Current Monitor Board 1.0

    Current Monitor Board 1.0 Designed for current monitoring with an oscilloscope, this single transformer board provides highly accurate current measurements in high bandwidth applications up to 500A peak current.  it has onboard burden resistors (not...

    $14.99
    Add to Cart
  • Current Monitor Board 2.0

    Current Monitor Board 2.0

    Current Monitor Board 2.0 The Current Monitor Board 2.0 is a cascaded current transformer board which can be used for monitoring peak currents in excess of 1000A.  A BNC connector allows easy connection to an oscilloscope or other compatible...

    $24.99
    Add to Cart
  • Current Transformer Board 1.0

    Current Transformer Board 1.0

    Current Transformer Board 1.0 This single current transformer is rated for at least 500A peak current and is perfect for feeback or current monitoring in small to medium power DRSSTC Tesla Coils.  Commercial current transformers provide much greater...

    $12.99
    Add to Cart
  • Current Transformer Board 2.0

    Current Transformer Board 2.0

    Current Transformer Board 2.0 The Current Transformer Board 2.0 has two identical current transformers and works greater in DRSSTC Tesla Coils where one would need a separate current feedback signal and overcurrent feedback signal.  Each single...

    $19.99
    Add to Cart