Created with Sketch. Created with Sketch.


  • Heatsink Extrusion 5.4

    Heatsink Extrusion 5.4 - 6" Length

    Heatsink Extrusion 5.4 Total length:  6.0" This is very heavy duty heatsink extrusion and this length is perfect for mounting four SOT-227 IGBTs or MOSFETs in a full-bridge configuration, or a single CM300 IGBT in a half-bridge configuration. ...

    Add to Cart
  • Heatsink Extrusion 7.3

    Heatsink Extrusion 7.3 - 12" Length

    Heatsink Extrusion 7.2 Total length:  12.0" This heatsink is used in our Reference Design 2.0 Tesla Coil and allows for the mounting of two (2) large CM300DY-24H half-bridge IGBT modules in a full-bridge configuration.  There is enough room on...

    Add to Cart
  • High Voltage Wire, 20 AWG, 15kVDC

    High Voltage Wire, 20 AWG, 15kV Use this wire for our Marx generator kits, HV multipliers, and HV power supplies. Specifications: 20 AWG, stranded Silicone Rubber, 0.125" DIA Max voltage:  5kVAC or 15kVDC Internal coronal suppression Silver coated...

    Add to Cart
  • IXYS IXGN60N60C2D1 600V/60A IGBT for Tesla Coil Use

    IXYS IXGN60N60C2D1 600V/60A IGBT

    IXYS IXGN60N60C2D1 is a 600V/60A SOT-227 IGBT that is used in small, higher frequency Tesla Coils. This IGBT is also used in our microBrute and miniBrute DRSSTC kits.  These IGBTs are fully tested and undergo a burn-in before being shipped to you...

    Add to Cart
  • Key Switch

    Key Switch

    Use a key switch to securely lock-out your high power DRSSTC Tesla coil system when not in use.  These should be wired in series with your main contactor coil or other safety interlock circuit to prevent unauthorized use.  These are also...

    Add to Cart
  • LED 18-SMD White 12V

    LED 18-SMD White, 12V

    LED 18-SMD White, 12V This is the LED used for our Human Conductivity or Body Light 1.0 kit.  Use this in conjunction with the BA-15S socket we also sell.

    $9.99 - $12.99
    Choose Options
  • Panel Mount LED, 24VDC, Blue Panel Mount LED, 24VDC, Amber

    LED, Indicator Light, 24VDC

    LED, Indicator Light, Panel Mount, 22mm These work great with our commercial MIDI Museum controller as well as our Power Sequencer System. Specifications: Voltage:  24VDC/24VAC Current:  18mA @ 24VDC Mounting hole size:  22.5mm DIA

    $7.99 - $12.99
    Choose Options
  • LED, T-1, Ultra High Brightness

    LED, Ultra High Brightness, Red

    These LEDs are extremely high brightness LEDs.  Even with a modest 3mA of current, they are blindingly bright. Click here for the datasheet (PDF) Specifications: Color:  Red Size:  T-1

    Add to Cart