DC Bus Bar assembly for Reference Design 2.0 and Best 12.0 DIY Tesla Coil systems.
0.124" FR-4 8oz copper busbar plate for holding two electrolytic capacitors with stud terminals.
Includes stud terminals and hardware.
30" x 16" x 7" Aluminum Toroid, Seamless
This heavy duty, seamless toroid is the one used in our Plasmasonic 2.0, Reference Design 2.0, and Best DIY 12.0 Tesla coils. It is made of 99% pure (grade 1100-O) aluminum, heavy duty, and welded with no...
The Pro Tesla MIDI 2.0 controller, or MIDI 2.0 controller for shrot, was designed as a stand-alone universal MIDI interrupter solution for our full range of musical Tesla coils including the Plasmasonic Musical Tesla coil systems as well as all of our...
Description - Coming soon
Click here for datasheet and instruction manual (PDF) - Coming soon.
Special Note: This controller is only compatible with full-bridge configurations.
For half-bridge powered Tesla coils, please use our standard Universal...
New for 2020 is our updated Universal MIDI 1.5 Interrupter which includes the latest features:
New 2020 Features
MIDI constant duty cycle technology - Maintains constant power across all frequency bands
New MIDI playback algorithms allow longer...
Resistor 20k, 50W Bleeder
These resistors are used across the DC bus capacitor stack in the Reference Design 2.0 DRSSTC system. They can also be used for most high power DRSSTC systems for DC bus voltages up to 680VDC.
Resistor 25 ohm, 100W
This resistor is used in series with the DC bus capacitors in the Reference Design 2.0 and Reference Design 3.0 DRSSTC systems to limit inrush current when power is first applied to the system. This resistor is connected in...
Test Speaker - 8 Ohms
These speakers work great for testing the MIDI output of your MIDI interrupter or controller. We use these to test our MIDI edits and the final MIDI output of our controllers prior to testing and operating with the actual...
This wire is perfect for winding gate and current transformers in your DRSSTC Tesla coil system.
24 AWG, Stranded
MIL-DTL-16878/1 (Type B) Spec Wire
How to Order:
Pricing is PER FOOT...
The Advanced Tesla Coil Controller (ATCC) was designed specifically as a stand-alone controller for permanent installations and displays. This includes museums, amusement attractions, haunted attractions, as well as other exhibits. The ATCC...
CNC'd primary coil supports for the Reference Design 2.0 DRSSTC Tesla coil. These primary supports are CNC machined from 1/2" thick polycarbonate and accept 3/8" OD copper tubing for the primary coil and 1/2" OD copper tubing for the grounded...