DC Bus Bar assembly for Reference Design 2.0 and Best 12.0 DIY Tesla Coil systems.
0.124" FR-4 8oz copper busbar plate for holding two electrolytic capacitors with stud terminals.
Includes stud terminals and hardware.
These secondary coils are custom designed for use in our Best 6.0 DIY and Best 8.0 DIY Tesla Coil kits. They can also be used for your own DRSSTC Tesla coil as well. These can be used in DRSSTCs producing up to and exceeding 6 feet in arc...
Capacitor, Cornell-Dubilier 940C20P15K-F 0.15uF, 2000V
IMPORTANT NOTE May 2022:
We can no longer stock these. For future purchases, please use the 942C version of the 0.15uF, 2000V capacitor.
Click here for the datasheet (PDF)
Note: The photo...
Resistor 20k, 50W Bleeder
These resistors are used across the DC bus capacitor stack in the Reference Design 2.0 DRSSTC system. They can also be used for most high power DRSSTC systems for DC bus voltages up to 680VDC.
Resistor 25 ohm, 100W
This resistor is used in series with the DC bus capacitors in the Reference Design 2.0 and Reference Design 3.0 DRSSTC systems to limit inrush current when power is first applied to the system. This resistor is connected in...
These secondary coils are perfect for low-to-medium power DRSSTC Tesla coils and supports arc lengths up to and exceeding 6 feet in length. They work well with our 18" x 4.5" spun aluminum toroids. They also work with our DIY Reference Design...
These secondary coils are custom designed for use in our Reference Design 1.0 Tesla Coil system. They can also be used for your own DRSSTC Tesla coil as well. These can be used in DRSSTCs producing up to and exceeding 6 feet in arc length...
This wire is perfect for winding gate and current transformers in your DRSSTC Tesla coil system.
24 AWG, Stranded
MIL-DTL-16878/1 (Type B) Spec Wire
How to Order:
Pricing is PER FOOT...
These transformers are new original stcok from the late Tesla Coil master, D.C. Cox from the Resonance Research Corporation. These are high power flyback transformers and are nearly impossible to find these days. These can produce up to 18kV...
These transformers are great for creating both your bridge voltage for your low power SSTC and your control voltages from line voltage in your electronics or Tesla coil kit. With the 24VAC transformer, you can easily create your +15VDC, +12VDC, and...
These transformers are great for creating your control voltages from line voltage in your electronics or Tesla coil kit. With the 18VAC transformer, you can easily create your +15VDC, +12VDC, and +5VDC rails for control components including logic...
High Voltage Wire, 20 AWG, 15kV
Use this wire for our Marx generator kits, HV multipliers, and HV power supplies.
20 AWG, stranded
Silicone Rubber, 0.125" DIA
Max voltage: 5kVAC or 15kVDC
Internal coronal suppression