Created with Sketch. Created with Sketch.

IGBTs

  • Gate Drive Board for CM300DY-12NF IGBT Gate Drive Board for CM300DY-12NF IGBT

    Gate Drive Board for CM300DY-12NF IGBT

    These CM300DY-12NF gate drive boards contain the necessary circuitry to properly use your IGBT.  Circuit provisions include both a 1/4W and 1/2W resistor for series gate drive, a diode for fast turn-off, and transient voltage suppressor (TVS) to...

    $9.99 - $19.99
    Choose Options
  • Gate Drive Board for CM300DY-24H IGBT Gate Drive Board for CM300DY-24H IGBT

    Gate Drive Board for CM300DY-24H IGBT

    These CM300DY-24NF gate drive boards contain the necessary circuitry to properly use your IGBT.  Circuit provisions include both a 1/4W and 1/2W resistor for series gate drive, a diode for fast turn-off, and transient voltage suppressor (TVS) to...

    $9.99 - $19.99
    Choose Options
  • Gate Drive Board for CM600HA-24H Gate Drive Board for CM600HA-24H

    Gate Drive Board for CM600HA-24H IGBT

    These CM600HA-24H gate drive boards contain the necessary circuitry to properly use your IGBT.  Circuit provisions include a 1/2W resistor for series gate drive, 1/4W shunt resistor, a diode for fast turn-off, and transient voltage suppressor (TVS)...

    $9.99 - $49.99
    Choose Options
  • IXYS IXGN60N60C2D1 600V/60A IGBT for Tesla Coil Use

    IXYS IXGN60N60C2D1 600V/60A IGBT

    IXYS IXGN60N60C2D1 is a 600V/60A SOT-227 IGBT that is used in small, higher frequency Tesla Coils. This IGBT is also used in our microBrute and miniBrute DRSSTC kits.  These IGBTs are fully tested and undergo a burn-in before being shipped to you...

    $34.99
    Add to Cart
  • Lug Terminal for CM300 and CM600 IGBTs and 00 AWG wire

    Lug terminal - 00 AWG, 1/4"

    Lug Terminal, 00 AWG, 1/4" High strength mechanical lug terminal accomodates up to 00 AWG wire and accepts a 1/4" stud size for mounting.  These are great for attaching to the screw terminals of IGBTs to provide a connection to primary wire and...

    $4.99
    Add to Cart
  • Mitsubishi CM300DY-12NF 600V/300A IGBT

    Mitsubishi CM300DY-12NF 600V/300A IGBT

    The Mitsubishi CM300DY-12NF IGBT is the workhouse for any high power DRSSTC Tesla Coil that is powered from 120VAC.  A single one of these IGBT modules contains two 600V IGBTs in a half-bridge configuration and when used in a half-bridge...

    $149.99
    Add to Cart
  • Mitsubishi CM300DY-24H 1200V/300A IGBT

    Mitsubishi CM300DY-24H 1200V/300A IGBT

    The Mitsubishi CM300DY-24H IGBT is a very popular IGBT used for medium to high power DRSSTC Tesla Coils.  Each one of these IGBT modules contains two 1200V IGBTS in a half-bridge configuration.  They can be used by themselves for a half-bridge...

    $199.99
    Add to Cart
  • Mitsubishi CM600HA-24H 1200V/600A IGBT

    Mitsubishi CM600HA-24H 1200V/600A IGBT

    The Mitsubishi CM600HA-24H is the king of the Tesla Coil IGBTs.  These IGBTs are used for monster sized DRSSTC Tesla Coils.  Use four of them in a full-bridge configuration to produce an output of nearly 1400V (+680V/-680V)! These are new stock...

    $199.99
    Add to Cart