Created with Sketch. Created with Sketch.

Components

  • Gate Drive Board for CM600HA-24H Gate Drive Board for CM600HA-24H

    Gate Drive Board for CM600HA-24H IGBT

    These CM600HA-24H gate drive boards contain the necessary circuitry to properly use your IGBT.  Circuit provisions include a 1/2W resistor for series gate drive, 1/4W shunt resistor, a diode for fast turn-off, and transient voltage suppressor (TVS)...

    $9.99 - $49.99
    Choose Options
  • IXDD614CI Gate Driver, 14A, RF

    Gate Driver - IXDD614CI 14A

    Gate Driver - IXYS / Claire IXDD614CI, 14A, RF Non-inverting, 14A, RF (frequency up to 4MHz) For ultra-high speed switching of power and RF MOSFETs.  These are used in our Class-E Audio Modulated Tesla coil kit. Click here for the datasheet (PDF)

    $8.00
    Add to Cart
  • IXDx430xx IXYS Gate Drivers

    Gate Driver - IXYS 30A IXDx430xx

    Gate Driver, IXYS IXDx430 30A Rare, very high current 30A gate drivers.  We still have limited stock on these extremely high performance gate drivers. TO-220-5 package Click here for the datasheet (PDF) Purchasing Options: IXDN430CI - Non-inverting...

    $5.00
    Choose Options
  • Gate Transformer Kit 5000-1

    Gate Transformer Kit 5000-1

    Gate Transformer Kit 5000-1 The 5000-1 gate transformer kit is designed for the highest power DRSSTC Tesla Coils which use full-bridge switching circuits.  These kits include five (5) sets of wires for a single primary and four secondary windings...

    $19.99 - $39.99
    Choose Options
  • Gate Transformer Kit 77-1

    Gate Transformer Kit 77-1

    Gate Transformer Kit 77-1 These gate transformer kits are perfect for all half-bridge power applications including low to mid power DRSSTC Tesla Coils, SSTCs, and flyback power supplies with switching frequencies up to 350kHz.  This kit includes one...

    $9.99 - $24.99
    Choose Options
  • Gate Transformer Wire

    Gate Transformer Wire 600V

    Gate Transformer Wire 600V This wire is perfect for all gate transformers used in DRSSTC Tesla Coils, flyback power supplies, and other high power bridges.  Each kit comes with different color wires. Use 3 conductor version for half-bridges and 5...

    $4.99 - $9.99
    Choose Options
  • Heatsink Extrusion 10.1

    Heatsink Extrusion 10.1 - 10" Length

    Heatsink Extrusion 10.1 Total length:  10.0" This is a massive heatsink which works fantastic for the highest power DRSSTC Tesla Coils.  This heatsink is used in our Reference Design 3.0 Tesla Coil and allows for the mounting of four (4) large...

    $149.99
    Add to Cart
  • Heatsink Extrusion 5.4

    Heatsink Extrusion 5.4 - 2.5" Length

    Heatsink Extrusion 5.4 Total length:  2.5" This is very heavy duty heatsink extrusion and this length is perfect for mounting a half-bridge of SOT-227 IGBTs.  The flat of the heatsink is 0.375" thick providing a lot of material to tap holes for...

    $19.99
    Add to Cart
  • Heatsink Extrusion 5.4

    Heatsink Extrusion 5.4 - 5" Length

    Heatsink Extrusion 5.4 Total length:  5.0" This is very heavy duty heatsink extrusion and this length is perfect for mounting a single CM300 IGBT brick in a half-bridge configuration or four (4) SOT-227 IGBTs in a full-bridge configuration. ...

    $39.99
    Add to Cart
  • Heatsink Extrusion 5.4

    Heatsink Extrusion 5.4 - 6" Length

    Heatsink Extrusion 5.4 Total length:  6.0" This is very heavy duty heatsink extrusion and this length is perfect for mounting four SOT-227 IGBTs or MOSFETs in a full-bridge configuration, or a single CM300 IGBT in a half-bridge configuration. ...

    $44.99
    Add to Cart